MC8000UE-S4

FEATURES

The MC8000UE-S4 ADSL Router utilizes the latest ADSL enhancements and router technologies to provide a robust Internet gateway suitable for most small to medium sized offices.

ADSL Compliance

• Compliant with ADSL standards
  • Full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1) standards
  • Splitterless ITU G.lite (G.992.2) specification
  • ADSL over POTS (Annex A) and ADSL over ISDN (Annex B)
• DMT modulation and demodulation
• Full-rate adaptive modem
  • Maximum downstream rate of 8 Mbps
  • Maximum upstream rate of 1 Mbp
• Tone detection for low power mode
• Supports splitterless ADSL implementation
• Supports Dying Gasp

ATM Protocols

• WAN mode support: PPP over ATM (RFC 2364) and PPP over Ethernet (RFC 2516)
• LAN mode support: bridged/routed Ethernet over ATM (RFC 1483) and Classical IP over ATM (RFC 1577)
• ATM Forum UNI 3.1 PVC
• Up to 8 VCs (Virtual Circuits)
• ATM SAR (Segmentation and Reassembly)
• ATM AAL5 (Adaption Layer type 5)
• OAM F4/F5

Bridge Mode

• Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)
• Supports up to 128 MAC learning addresses

Router Mode

• IP routing-RIPv2
• Static routing
• DHCP (Dynamic Host Configuration Protocol) Server and Client
• NAPT (Network Address and Port Translation)
• NAT (Network Address Translation)
• ICMP (Internet Control Message Protocol)
• Simultaneous USB and Ethernet operation (Optional)

Security

• User authentication for PPP
• PAP (Password Authentication Protocol)
• CHAP (Challenge Authentication Protocol)
• Password protected system management

Ethernet Interface

• Compliant with IEEE 802.3 standard
• 10/100 Mbps auto selection
• 4* LAN Port

USB host Interface(Optional)

• Compliant with USB Specification, Revision 1.1
• USB full speed (12 Mbps)
• Vendor specific descriptors

HTTP Web-based management

• Firmware upgrade via HTTP
• Customizable Web pages
• WAN and LAN side connection statistics
• Configuration of static routes in the Routing table
• Configuration of NAT/NAPT
• Password protected access
• Selection of Bridge or Router Mode
• PPP user ID and password
• Configuration of VCs (Virtual Circuits)