IRoute128 Integrated TA+Router

SPECIFICATIONS

Type

• External

U Interface (iRoute128UE model only)

• ITU-T G.961
  
• 2-wire metallic line
  
• 2B1Q line coding
  
• 1 x RJ11 modular jack

S/T Interface (iRoute128SE model only)

• ITU-T I.430
  
• 4-wire metallic line
  
• AMI line coding
  
• 1 x RJ45 modular jack

TR switch

• 1 x Terminating Resistance switch
  
• Set 100 Ohm or none

Reset switch

• 1 x Reset switch

Switch Type

• Euro-ISDN DSS1 (EDSS1)
  
• National ISDN I (NI-I)
  
• Japan INS-NET64

Ethernet IEEE802.3

• 3 x 10BaseT Hub port
  
• RJ45 Modular jack

Router Protocol

• PPP/ML-PPP
  
• BACP/BOD
  
• DOD
  
• TCP/IP
  
• NAT
  
• DHCP
  
• PAP/CHAP
  
• IP header compression

Management

• WEB configuration management
  
• E-mail sharing
  
• Call history log file
  
• Setup from telephone keypad

Analog Port

• 1 or 2 RJ11 modular jack
  
• REN : 2/port
  
• ITU-T G.711
  
• a- law/u-law selectable by software
  
• -55VDC power feeding
  
• polarity reverse
  
• DTMF dialing
  
• FSK caller-ID signal (Japanese version only)
  
• Tone source generation
  
• Dial tone
  
• Busy tone
  
• Incoming tone
  
• Local holding tone

Service

• local call waiting
  
• Speed dialing
  
• Call screening
  
• Global call select
  
• Receive Priority
  
• Two analog ports version:
  
• Local call transfer
  
• Local call forwarding
  
• Local three party conference
  
• Inner intercom
  
• Reason of disconnect

Console Port

• EIA RS-232C
  
• 1 x DB-9 female connector
  
• Enhance AT/ISDN command
  
• Auto baud detection
  
• Up to 230.4kbps speed
  
• Flow control : XON/XOFF and RTS/CTS
  
• Router CLI command
  
• Fixed 115.2kbps speed

Data protocol

• V.110
  
• V.120
  
• RVSCOM Soft-Fax (option)
  
• PPP connection from console port

LED Display

• Power, Green : power on state
  
• Red blinking : set call forwarding
  
• LAN, Green : Ethernet data transmission
  
• DTE, Green : RS232 port connected
  
• Off : not connected
  
• TX/RX , Green : transmitting/receiving data
  
• Line, Off : Line sync with ISDN network
  
• Red blinking : lost sync
  
• Green :1-B channel busy
  
• Orange : 2-B channel busy

Maintenance

• Flash EPROM for software upgrade
  
• Minimum operation mode for flash failure
  
• Factory default setting
  
• Power on self diagnosis

Power

• 100 ~ 250 VAC, 50/60Hz
  
• 7.5VDC, 2A output
  
• Overload protection

Accessory

• 1 x RS232 cable
  
• 1 x AC/DC power adapter
  
• 1 x RJ11 U cable (iRoute128UE model)
  
• 1 x RJ45 S/T cable (iRoute128SE model)
  
• 1 x RJ45 Ethernet cable
  
• 1 x user manual
  
• 1 x CD EMI CE Class-2, VCCI Class-B

Operation

• 0¢Jto 50¢J

Humidity

• 10 to 95% RH

Dimension

• 50Wx158Dx170H(mm)