TC-200GT

DESCRIPTION

.TC-200GT, G.SHDSL modem, transports multi mega bit stream
over one or two pair of copper wires using TC-PAM technology.
This modem supports multiple data rates ranging from 64 Kbps
to 4608 Kbps. TC-200GT equips with three DTE interfaces which
includes V.35 [X.21,..], Ethernet and E1/T1. The three different
interfaces can work simultaneously by sharing the DSL bandwidth.
The Ethernet interface meets IEEE 802.3 10/100 Base-T with
MAC bridge functions, which allows LAN-to-LAN connection
over the G.SHDSL lines

Application flexibility could be easily achieved by
choosing user DTE interfaces and selection of data
rates. The TC-200GT uses in-band Embedded
Operation channel for controlling and monitoring
the remote unit. The comprehensive diagnostics
function developed includes G.SHDSL, E1 line
performance monitoring, in-band numbering
V.54 local and remote loopbacks and real
time alarm report.

Local craft port, LCD display and pushbuttons
facilitate local configuration and diagnostics.

FEATURES

• Meet ITU-T G.991.2 standard
• Programmable for single, two loops and 1+1
  protection mode operations
• Supports DTE data rate from 64Kbps to 4608 Kbps
  per 64Kbps increment
• Future firmware upgradeable to G.shdsl.bis for data
  rate up to 11.392 Mbps
• Interfaces for either V.35, LAN plus FE1/T1 or
  2 E1/T1 plus V.35 [or LAN] interfaces
• G.703 interface can be programmed as T1 or E1
• Software programmable for V.35/V.36/RS-530/X.21
• V.35, LAN and FE1/T1 can work simultaneously by
  Nx64K time slot assignments
• Remote control and monitoring using in-band EOC channel
• Supports DSL PRBS BER test
• Supports numbering V.54 local and remote loopback
• Optional remote power feeding is programmable for
  120V,160V and 200V for full range DSL reach
• Supports wetting current
• G.SHDSL and E1/T1 line performance monitoring
• 96*15 minute and 7*24 hours performance data storage
• Field software upgradeable
• Support point to multipoint applications
• Automatic DSL loop crossover detection and operation.
• Supports two E1/T1 interfaces for better network
  provisioning.
• Hot swapable.
• Plug-in card swapable.